Chimney cap maintenance
The chimney flashing prevents water from seeping into the house from the roof. Any leaks must be fixed right away to avoid any further damage.
Tools and materials needed
- Extension ladder
- Masonry Trowel
- Hammer
- Silicone caulk w/caulking gun
- Flashing cement
Preparations
Get a ladder and get on the roof.
Remove the old seal
Peel and scrape off old sealant to prepare the area for the new sealant. When you are done, apply the sealant.
Flashing refit
Reposition the flashing back into before applying cement or caulk. Use a hammer to gently hammer the metal sheets back into place. Be careful not to hit too hard.
Apply caulk
Apply the silicone caulk and be sure to reach every small gap. The edges of the flashing must also be covered with caulk. Apply as much as you can.
Applying cement
After the silicone caulk has dried, apply the cement, using a masonry trowel. Spread it even on the flashing. You could apply it just on the edges too. Anyway, the cement will do it’s job.