Drip irrigation pressure regulator
Also known as a drip irrigation system, the low pressure irrigation system is used basically to water flower beds and gardens. The system will work best if you have an external water spigot.
Start off by connecting the back flow preventer to the water spigot.
This way, water won’t be able to go back into the main water system pipes. After that, connect the pressure regulator to the back flow preventer. This device will allow you to adjust the pressure of the irrigation system. Connect a water filter to the pressure regulator and then connect the drop hose to the water filter. The water will drip along the length of the hose providing a constant flow of water. Place the hose around the landscape making sure it reaches the plant stems but doesn’t come in contact with the plant itself. As a finishing touch, stake the hose to the ground using wooden stakes. This way the hose won’t move when water passes through it.
|drip irrigation backflow preventer, drip irrigation components, drip irrigation efficiency, drip irrigation hose, drip irrigation installation process, drip irrigation parts, drip irrigation pressure regulator, drip irrigation system, drip irrigation system hose, drip irrigation system installation, drip irrigation type, drip irrigation water filter, drip irrigation water spigot, irrigation, irrigation system|