Hot tub non skid steps
A hot tub a a great addition to the property. To make sure you use it safely, you need to be cautious when building the steps.
Tools and materials needed
- Pre cut stringers
- Hammer
- Nails
- Drill
- Three pieces of lumber (8 feet x 16 inches x 1/2 inch)
- No-slip pads
- Super glue
- Measuring tape
- Pencil
- “L” brackets
- Electric screwdriver
- 1/4-inch screws
- Wood glue
- Two pieces of 1/4-inch plywood (4 feet x 4 feet)
- Electric hand saw
Size
You need to measure the length of a side of the hot tub.
Installation
Apply wood glue to the sides of the stringers. Place the first step and line the edges. Place the stringer and then place the second one 1 1/2 inches away. Repeat the process. Make sure the wood is dry before continuing. Apply glue to the edges of the steps and stringers and attach plywood sheets to the ends of the steps. Nail the steps to secure them and then use a hand saw to finish the steps.
Safety enhancement
As a finishing touch, you can add a non-slip pad to each step in order to increase the safety of the steps. All you need to do is apply a thin line of glue on the steps and then add each pad.