Irrigation system hose

A drip irrigation system consists of perforated hoses that run through the soil of the garden and irrigate the plants above. The system is connected to a faucet that assures water.

You must install a water timer to the water faucet.

Screw it clockwise. The timer makes the system need almost no maintenance. Connect a back flow regulator to the system timer. This way, dirty water won’t be able to enter the main water source. Place a pressure regulator under the back flow preventer to increase the pressure on long lengths of hose.

Place a water filter under the pressure regulator. It will prevent sediments from entering the water supply and prevent drip holes from clogging. At the end of the hose, connect a valve at the bottom of the water filter. Test the system, turning the faucet on.

garden irrigation system, irrigation, irrigation system, irrigation system backflow, irrigation system components, irrigation system connectors, irrigation system faucet, irrigation system hose, irrigation system pipe, irrigation system pressure regulator, irrigation system valve, irrigation system water source, sub-irrigation system