Irrigation system

The drip irrigation system is superior to the sprinkler system because it delivers the water directly into the area where the plant roots are. This irrigation method creates a lot less runoff and doesn’t waste nearly as much water as the sprinkler irrigation system.

Begin by attaching a back flow preventer to an exterior water source like a water faucet.

This device will keep contaminated water from seeping in back into the main water system. Next you must attach a timer to the back flow preventer. The timer will automatically turn the water off at specific times of the day. Now you must attach a pressure regulator to the timer. This device will control the water flow as to avoid split hoses and broken pipes.

Choose between a resistant perforated PVC pipe system or a soaker hose system. The second one is a lot cheaper and easier to install. Attach a garden hose to a pressure regulator. This hose will be used to attach the soaker hose to the faucet. Connect a hose splitter to the end of the garden hose and then attach the soaker hose to it. There mustn’t be more than 100 feet of hose for each faucet.

Place the hose on a flat surface and arrange it in loose circles around the plants or in straight lines along the rows of plants. The hoses should be 12 to 18 inches apart in sandy soil and 18 to 24 inches apart in clay soil. The soil’s moisture level must be kept constant. Adjust the timer so that the soil remains damp enough.

drip irrigation backflow preventer, drip irrigation components, drip irrigation design, drip irrigation efficiency, drip irrigation hose, drip irrigation installation, drip irrigation installation process, drip irrigation parts, drip irrigation position, drip irrigation pressure regulator, drip irrigation system, drip irrigation system hose, drip irrigation system installation, drip irrigation type, drip irrigation water faucet, drip irrigation water filter, drip irrigation water spigot, irrigation, irrigation system