About the chimney relining system

A chimney liner is used to keep the area surrounding the chimney from overheating. It also doesn’t allow sparks to come near fuel in the case of fireplaces and wood stoves. A relining system is used for chimneys that have a fireplace, furnaces or water heaters.

If you are not afraid of heights, this task should be simple for you.

Tools and Materials

  • Relining system
  • Ladder
  • Screwdrivers

Right sized liner

The size of the liner can be found out measuring the length of the chimney segment by segment.The first segment is from the top of the chimney to the top of the roof, the second represents the attic area and the third is from the ceiling to the opening of the fireplace. These segments put together represent the length of the liner. For the best results, choose stainless steel as the liner material.

Liner installation

The liner must be simply lowered down the chimney from the top until it reaches its end or an outlet. Don’t forget to secure the liner at the chimney crown using stainless steel screws or sheet metal screws. Also, secure the liner at the chimney outlet end too.

chimney, chimney aluminum flashing, chimney caps, chimney cast-in-place liner, chimney components, chimney copper flashing, chimney dimensions, chimney flashing, chimney flues, chimney inspection, chimney insulation, chimney liner, chimney liner type, chimney maintenance, chimney masonry, chimney measurements, chimney stainless steel liner, chimney steel flashing, chimney ventilation, how to install a chimney liner, how to install a chimney liner kit, replacing a chimney liner